How Do You Fix Your TV When The Screen Goes Black: Easy Guide
It might happen that your TV screen periodically goes black and turn off at times. However, the sound still works as before and the illumination of the power light stays evident when the TV screen turns black. You might ask is this what is known as the Black Screen of Death?
There are certain troubleshooting steps to fix this issue. But this will vary from model to model. However, there is a generic way to resolve this issue. After carrying out thorough research, we have come up with the handiest ways to sort things out.
Therefore, go through the write up seriously to get rid of this annoying issue at the earliest.
“TV Screen Goes Black” - Here is How to Fix it
Follow the under-mentioned steps to know how to resolve black screen error.
Examine Power Saver/Energy Saver Mode is Set to Off
There are certain television sets that turn off suddenly. However, you need to play the sound if no noise is coming from your TV. In this case, you have to check the power or energy saver mode and set that to Off.
Sleep Timer Turned Off Mistakenly? Turn it On
You might have mistakenly press the Sleep timer on the remote. And, this will switch off the TV. So, what you need to do is turn it on. And then, check if the TV is working properly.
Examine Whether the Store MODE or Demo MODE is Switched Off
Store mode or the demo mode is basically a Factory Setting intended for the purpose of display or demo. Therefore, you need to check whether it is turned off or not.
Using a Separate HDMI Port for the Component
First of all, you have to detach HDMI from one input. After that, plug this to a completely different input to check whether the port is faulty or not.
Connect a Different Component to the TV
It might happen that the component used like Blu-Ray/CABLE BOX can cause this irritating black screen problem. In this case, you have to connect a different component to the TV.
Turn OFF the Component and Then Turn it Back On
The component you are using might have a temporary fault which requires a reset. If this is the case, then turn it off for some time. Then, turn the component on and check if the issue is resolved.
Fixing TV with Firmware Update
There are certain TV sets which had an issue with the firmware updates. If there is a TV where the screen goes blank, follow the below steps to find out whether there is an issue with the firmware.
- First of all, you need to examine if you like to pull up the TV menu. If you draw the menu, this issue is arising from one of the sources. Therefore, examine and then reset each and every component.
- If you are unable to pull up the TV menu, you need to update the TV firmware. After that, you have to test the TV in another power outlet. You need to ensure that the device is connected directly to the wall outlet.
Even after following the above steps the issue persists, then you have to seek professional help.TV Repair Dubai Team has years of experience. Pocket-friendly repair service.
Fixing TV Having HDCP Issues
There are certain instances when TV owners reported HDCP issues. This issue takes place when the connection between 2 components is lost.
- First of all, you need to switch off all the components. After that, switch it ON. This starts the normal operation and prevents the HDCP problems.
- Move to the TV menu. After that, you have to update the firmware in order to prevent the HDCP issue. This is basically a High-bandwidth Digital Content Protection.
Concealed Fault Inside HDMI Cable
You might replace the HDMI cable which might have a short or another defect. This may lead to a black screen issue.
Disconnect the TV for 5 Minutes in Order to Attempt the Reset
If you unplug the TV, it will reset the television and will wipe out the temporary faults. Thus, restart your TV.
Factory Reset the TV
This solution is only applicable to Smart TVs. To perform the factory reset, move to the MENU. After that, click on Factory Reset. However, this will remove the picture settings which you have saved earlier. However, this option won’t be available if you are not using a Smart TV.
Download the Latest Software/Firmware Update
The present firmware which you are using comes with an issue. It requires immediate update. Therefore, at times firmware/software update can easily resolve the black screen issue.
However, this process varies on the basis of the model.
Wrapping Things Up
This article covers the most effective fixes to prevent black screen error. If you follow the steps properly, you can surely be able to fix this issue.
However, even after following the above steps you face this issue, you can surely go for professional help. Moreover, you can refer to the user guide to get a quick glance. If you like this article, please leave your comment in the comment section.
If you need help check out SAMSUNG TV Repair Instant support as per your requirement.
